3 holes for mounting on a hub

6 in. pliers with very high quality spring return.

10 in. pliers with spring return.

0-30 and 0-60 psi
Bleed valve and rubber cover on gauge.

Your tire changing troubles are over! Here is a machine that can quickly and easily change the tires on your kart with no damage to rims or tires.
The special shape of the bead breaker and the tire changing tool was designed specifically for the 5-6 inch diameter wheels used on karts.

Tecnical Data:
• Height-adjustable
• Manual-lock wheel support plate
• Double rotation direction wheel support plate controlled by an electric motor
• Standard power supply requirements: 220V / 50Hz / single phase. Power consumption: 0.11Kw
• 5-6" diameter wheels (Kart), with width from 110mm to 270mm
• Weight: 33Kg
• Dimensions: 420 x 440 x 620mm
• Operating manual and special grease included

Pressure tester for Walbro and Tillotson carbs.

Protective rubber shell and bleed valve.

Different models available for 35 pitch, 219 pitch and 428 pitch chain.

the Pro-Toe provides an accurate, repeatable and user friendly protocol to set and maintain toe and camber.

The Sniper works by projecting a laser beam from one side of the kart to the other, at a visual grid system on the surface of the opposing unit. Both camber and toe readings can then be seen simultaneously either with the kart on the trolley, or on the ground with wheels on and the kart fully loaded.

For bleeding brake system without master cylinder reservoir.